Friday, December 11, 2009

REQUIREMENTS OF ISO 14001

REQUIREMENTS OF ISO 14001
In order to effectively implement and benefit from an ISO 14001 EMS, it is important to
have an understanding of the standard’s requirements. A quick review of the standard
shows that it is structured following the Plan, Do, Check, Improve philosophy of the
Total Quality Management movement, as follows:

PLAN
4.2 Policy
4.3 Planning

DO
4.4 Implementation and Operation

CHECK
4.5 Checking and Corrective Action

IMPROVE
4.6 Management Review

Within these five elements are 17 sub-elements stating the various requirements.

4.2 Policy

4.3 Planning
4.3.1 Environmental Aspects
4.3.2 Legal and Other Requirements
4.3.3 Objectives and Targets
4.4.4 Environmental Management Programs

4.4 Implementation and Operation
4.4.1 Structure and Responsibility
4.4.2 Training Awareness and Competence
4.4.3 Communications
4.4.4 EMS Documentation
4.4.5 Document Control
4.4.6 Operation Control
4.4.7 Emergency Planning and Response

4.5 Checking and Corrective Action
4.5.1 Monitoring and Measurement
4.5.2 Nonconformance, Corrective, and Preventive Action
4.5.3 Records
4.5.4 EMS Audit

4.6 Management Review

Within these 17 sub-elements are all of the requirements, or “shalls”, necessary to
conform to ISO 14001. There is no substitute for reading the standard in terms of
recognizing the requirements. As a matter of fact, no auditor should embark on an audit
without having easily available the criteria to which they are doing the audit. However,
below we briefly summarize the key points of the sub-elements. This summary is not
intended to be a replacement for ISO 14001, and should not be used exclusively as such
during an audit.

Detailed Section by Section Summary

4.2 Policy
ISO 14001 requires that the organization have a policy statement to drive the EMS.
These tend to be short, one page or less documents, and simply affirm the commitments.
There is no expectation that specific details be noted in the policy. For example, the
commitment to pollution prevention can simply be stated saying, “we are committed to
prevention of pollution”. The policy must be clearly endorsed by top management and
be available to the public and employees. Although the availability to the public can be
rather passive; i.e. “is here if they want it”, there is an expectation that the employee
awareness is more proactive. Section 4.2 of ISO 14001 lists the other requirements of the
policy.

4.3.1 Environmental Aspects
This element requires a procedure that not only identifies the aspects and impacts, but
also provides for determination of significance, and keeping the information up to date.
ISO 14001 does not prescribe what aspects should be significant, or even how to
determine significance. However, it is expected the organization will develop a
consistent and verifiable process to do so.

4.3.2 Legal and Other Requirements
This is a requirement for a procedure that explains how the organization obtains
information regarding its legal and other requirements, and makes that information
known to key functions. This is not the assessment or compliance audit requirement, but
rather a more up front determination of requirements.

4.3.3 Objectives and Targets
There is no requirement for a procedure in this element, only that objectives and targets
be documented. It does require that certain items be considered in developing the
objectives, such as legal requirements and prevention of pollution. It is sometimes
easiest to develop a procedure anyway for this element to be able to verify these
considerations were made.

4.3.4 Environmental Management Programs (EMP)
EMPs are the detailed plans and programs explaining how the objectives and targets will
be accomplished. These EMPs usually note responsible personnel, milestones and dates,
and measurements of success. Noting monitoring and measurement parameters directly
in the EMP facilitates conforming to 4.5.1 on Monitoring and Measurement discussed
below.

4.4.1 Structure and Responsibility
ISO 14001 requires that the relevant management and accountability structure be defined
in this element. This usually takes the form of an organizational chart. Also, the
organization must denote the Management Representative who is responsible to oversee
the EMS and report to management on its operation.

4.4.2 Training Awareness and Competence
The key point in this element is that personnel must receive applicable training regarding
the EMS. Specific requirements are itemized in ISO 14001, and include general,
company-wide items such as knowing the policy, to more function-specific training on
aspects and emergency response. An organization usually responds to this element with a
training matrix, cross-referencing to training materials and records.

4.4.3 Communications
Procedures are required for both internal and external communications. Note that ISO
14001 only requires procedures, and allows the organization to decide for itself the
degree of openness and disclosure of information. Whatever the decision in terms of
disclosure, that decision process must be recorded.

4.4.4 EMS Documentation
This requirement is simply that the organization has documented the system in either
electronic or paper form such that it addresses the elements of the standard and provides
direction to related documentation. Not all ISO 14001-required procedures need to be
documented, as long as the system requirements can be verified.

4.4.5 Document Control.
Procedures are required to control documents, such as system procedures and work
instructions, and to ensure that current versions are distributed and obsolete versions are
removed from the system.

4.4.6 Operational Control
This element is the one which connects the EMS with the organization as a whole. Here,
the critical functions related to significant aspects and objectives and targets are identified
and procedures and work instructions created to ensure proper execution of activities.
Requirements for communicating applicable system requirements to contractors are also
addressed.

4.4.7 Emergency Planning and Response
Although typically addressed through conventional emergency response plans, this
element also requires that a process exist for identifying the potential emergencies, in
addition to planning and mitigating them. A linkage to the aspects analysis, where
impacts are assessed, is appropriate. Emergency incidents include those that may not be
regulated, but may still cause significant impact as defined by the organization.

4.5.1 Monitoring and Measurement
Procedures are required describing how the organization will monitor and measure key
parameters of operations. These parameters relate to the significant aspects, objectives
and targets and legal and regulatory compliance. In order to properly manage the system,
measurements must be taken of its performance to provide data for action. Responses to
this element usually cross reference to many other specific procedures and work
instructions describing measurement and equipment calibration. It is in this element that
we find the requirement for what is commonly referred to as a compliance audit.

4.5.2 Nonconformance, Corrective, and Preventive Action
This element requires procedures for acting on Non-conformances identified in the system,
including corrective and preventive action. Non-conformances may be identified through
audits, monitoring and measurement, and communications. The intent is to correct the
system flaws. Typically, Corrective Action Report (CAR) forms are the norm, noting the
nonconformance, the suggested fix, and closure of the action when completed. Note that
this requirement does not imply in any way that the party identifying the nonconformance
must be the one to suggest the fix. Instead, it is expected that the system provide for the
information to be routed to the most appropriate party to address the concern.

4.5.3 Records
Records are expected to exist to serve as verification of the system operating. For
example, records include audit reports and training records. Unlike controlled
documents, records are “once and done” documents, resulting from the execution of some
process or procedure. Procedures in this element are required for the maintenance of
records.

4.5.4 EMS Audits
ISO 14001 requires that the system provide for internal audits. This procedures(s) will
include methodologies, schedules, and processes to conduct the audits. Interestingly, the
EMS audit will in essence, audit the audit process itself!

4.6 Management Review
This element requires that periodically, top management will review the EMS to ensure it
is operating as planned. If not, resources must be provided for corrective action. For
areas where there are no problems, the expectation is that with time, management will
provide for improvement programs. Usually there is no detailed procedure for this
element, although records of agendas, attendance, and agreed upon action items are
maintained as verification.

Thursday, December 10, 2009

ISO 14001 Template

The ISO 14001Template were created to help you to prepare the ISO 14001Quality Manual, ISO 14001 Operating Procedure & ISO 14001 Forms. This ISO 14001 Template contains prewritten Quality Manual, Operating Procedure along with sample forms and checklists included as Microsoft Word & Excel format. It provides sample practical documentation in the proper ISO format required by the latest ISO 14001:2004.

The ISO 14001 Template features:-

• Specifically designed to be very easy to customize so that the entire documentation that is required by ISO 14001 : 2004 can be quickly and easily developed.
• Professional design and layout.
• It is designed to fulfill the ISO 14001 : 2004 requirements. .
• Easy to read, easy to understand, and easy to implement.
• Easy to audit as it follows the structure of ISO 14001: 2004..
• Includes the required Process Flowchart.

The ISO 14001 Template series itself is generic, and is designed to be applicable to any manufacturing or service process. The ISO 14001 Environmental Management System (EMS) Template are consist of:

a. ISO 14001 EMS Manual Template
The Policy is fundamental to meeting the needs of ISO 14001. It essentially defines the rules and requirements of the organization with respect to the standard/EMS and as such is a central plank of the initiative.
ISO 14001 Manual Template Consist of:
• Section 1: General EMS Requirement
• Section 2: Environment Policy – Objectives, Targets & Programmes
• Section 3: EMS Planning
• Section 4: Implementation & Operation
• Section 5: Checking & Monitoring
• Section 6: Management Review

b. ISO 14001 Operating Procedure
The ISO 14001 Operating Procedure Template includes and integrates ISO 14001 EMS requirements, thus containing the most difficult part of the ISO 14001 documentation. The ISO 14001 Operating Procedure Template include the detailed samples of the Operating Procedures to fulfill the ISO 14001 : 2004 requirements for the procedures, making the customization process even easier. The entire manual follows the structure of ISO 14001 : 2004.

ISO 14001 Operating Procedures Consist Of:
• Objective & Targets Procedure
• Environmental Management Program Procedure
• Environmental Aspect & Impact Identification & Evaluation Procedure
• Environmental Monitoring & Measuring Procedure
• Legal & Others Requirement & Evaluation Of Compliance Procedure
• Emergency Preparedness & Response Procedure
• Chemical Control Procedure
• Waste Management Procedure
• 5S House Keeping Procedure

c. ISO 14001 Forms
ISO 14001 Forms Consist Of :
• Environmental Non-Conformance Master List
• Environmental Non-Conformance Notice Form
• Environmental Management Program Form
• Environmental Aspect & Impact Identification Form
• Green Environment Internal Audit Master Plan
• Green Environment Plan & Activities Form
• Green Environment Material Purchase Master List
• ISO 14001:2004 Internal Audit Summary Report
• Equipment Monitoring Master List
• Environment Preventive Action Report (PAR) Master List
• Environment Preventive Action Report (PAR) Form.
• Environmental Responsible Form
• EMS Organization Chart.
• Waste Management Schedule Form
• Totally Abolish Banned Substances & Target Deadline For Total Abolishment Form

For more information, please visit us at:

http://www.e-wia.com
http://www.iso-consults.com
http://www.iso9000-software.com

IS0 14001 – HISTORICAL DEVELOPMENT

Firstly ISO 14000 environment system standards was prepared in June of 1992 year in Rio at world apex and this standard brooks decisions of this world apex and Rio contract principles. After 1 year, ISO established one technique committee which is yielded by 50 different country representatives to prepare international environment management system in 1993 year. ISO 14001 environment management system standard was issued in September of 1996 year with works of this committee. ISO 14001 standard is used as voluntary now but ISO 14001 will be burden by coercions of societies, international organizations, states in the future. Levels which environment management system passed are the following briefly:

= Europe community countries issued I action plan in 1973 year (to practice protecting preventions of environment )
= BS 7750 Standard in 1992
= Rio Declaration in 1992 year
= ISO/TC 207. Environmental management technique committee was established in 1993 year to develop ISO 14000 family standards
= TS 9719 standard (environment management system – General features) in 1994 year
= ISO 14001 standard in 1996 year
= ISO 14001 current version in April of 2005 Nisan 2005

ISO 14001 ENVIRONMENTAL MANAGEMENT SYSTEM AUDIT

In order to be in conformance with this provision of ISO 14001 an organization must be able to answer the overall question: “How does the organization conduct environmental audits of the EMS?”. In order to answer that question four specific tasks must be addressed under the Management System Audit section of the standard.

First, the organization must develop a program and related procedures that define an audit plan of the environmental management system. In addition the program must define frequency of the audit process. Second, the procedures must specify the methodology of the audit process, including the qualifications of the auditors. Third, the audit reports must be submitted to top management. Fourth, the audit reports must provide recommendations directed at correcting any reported nonconformance that was discovered in the audit process.

The audit process discussed in this section of the standard is directed at internal audits. The standard is silent on the frequency issue. Generally accepted practice with a mature ISO 14001 system is a total audit of the system once a year. In the implementation phase of an environmental management system a more frequent audit process might be appropriate. In addition any part of the environmental management system that has been previously determined to be in nonconformance should be audited with an increased frequency. The methodology of the audit process required by the standard requires two distinct steps:

A. determine whether the environmental management system conforms to the requirements of ISO 14001, and
B. that the system has been managed as described in the Environmental Policy statement, the Environmental Objectives and Targets, and the related work descriptions and procedures.

It is critical that an audit report that relates a nonconformance be forwarded to top management promptly. The internal audit staff must be competent with respect to the requirements of ISO 14001.

DOE Policy on ISO 14001

An early approach on ISO 14001 was to require DOE contractors to develop an ISO 14000-like EMS through a DOE-wide Order. Some contractors did not like the implication of the draft Order would ‘require’ a ‘voluntary’ standard. Although some viewed the draft Order as broad and flexible, the Order was never finalized. Likewise, largely due to a change of administration, DOE was not able to establish a formal Policy regarding ISO 14001.

The current approach within DOE is to encourage voluntary implementation of an environmental management system as an integrated component of the contractually-required Integrated Safety Management System (62 FR 34841).4 Further, DOE encourages implementation of an environmental management system where it makes good business sense for the individual site. The voluntary approach is supported by the White House Office of Science and Technology Policy,5 and the integrated approach has been recognized as acceptable by EPA.6 DOE is also actively involved with the standard both at DOE sites and through an Interagency Working Group on ISO 14000. In addition, many DOE contractors are implementing ISO 14001 where it makes business sense for their individual site. Implementation is seen in a variety of ways from full third-party certification to implementation of various aspects of the standard.

ISO 14001 Standards – Emergency Preparedness and Response Plans

ISO 14001 Section 4.4.7, Emergency Preparedness and Response, requires that organizations establish and maintain procedure(s) to:
1. Identify potential accidents and emergencies
2. Respond to accidents and emergencies
3. Prevent and mitigate the environmental impacts that may be associated with accidents and emergencies.
Section 4.4.7 also requires that organizations review and revise, when necessary, their emergency preparedness
and response procedure(s), especially after an accident or emergency situation. Organizations must also periodically test such procedures where practicable.
Most organizations have already developed and implemented emergency response plans to comply with various federal and state regulations that require such plans. Examples of federal regulations that require such plans include:
• Resource Conservation and Recovery Act (RCRA) Contingency Plans
• Spill Prevention, Control, and Countermeasures (SPCC) Plans
• Facility Oil Response Plans under the Oil Pollution Prevention Act of 1990
• Employee Emergency and Fire Prevention Plans under Occupational Safety and Health Administration (OSHA).
Some states have regulations that require similar emergency response plans. For instance, the state of Pennsylvania requires certain facilities to develop and implement a Preparedness, Prevention, and Contingency (PPC) Plan in addition to federal requirements.
The ISO 14001 requirements are similar to the requirements of most regulatory emergency plans. Whether your facility has emergency response plans or not, you should review the following sections to ensure you meet the ISO 14001 emergency response requirements

ISO 14001 Standards – Nonconformance, Corrective and Preventive Action

ISO 14001:2004 Section 4.5.2, Nonconformance And Corrective Andrequires that organizations establish and maintain procedures that:

Preventive Action,

• Define responsibility and authority for handling and investigating nonconformance

• Take action to mitigate any impacts caused by nonconformance

• Initiate and complete the appropriate corrective and preventive action.

ISO 14001:2004 Section 4.5.2 also states that “…any corrective or preventive action taken to eliminate the causes of actual and potential nonconformances must be appropriate to the magnitude of problems and commensurate with the

environmental impact encountered.”

If any changes in the documented procedures result from any corrective and preventive action, you must implement and record these changes.

Nonconformance refers to any issues that do not meet or comply with the requirements established in the EMS or the ISO 14001 standard. Procedures developed under ISO Section 4.5.2 will provide the mechanism to handle

non-conformances and to ensure steps be taken to prevent a recurrence.

The procedures should include the following key steps:

1. Identify the problem

2. Determine the cause

3. Establish the solution

4. Document the solution

5. Implement the solution

6. Record the documentation and implementation of the solution

7. Communicate the solution.